OpenCores

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [core/] [rtl/] - Rev 111

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
111 Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly.
olivier.girard 1308d 08h /openmsp430/trunk/core/rtl/
106 Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution).
olivier.girard 1364d 06h /openmsp430/trunk/core/rtl/
105 Removed dummy memory read access for the MOV/PUSH/CALL/RETI instructions.
These were not problematic but this is simply cleaner that way.
olivier.girard 1379d 07h /openmsp430/trunk/core/rtl/
103 Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL.
olivier.girard 1384d 13h /openmsp430/trunk/core/rtl/
102 Fixed bug reported by Mihai ( http://opencores.org/bug,view,1955 ).
The following PUSH instructions are now working as expected:

- indexed mode: PUSH x(R1)
- indirect register mode: PUSH @R1
- indirect autoincrement: PUSH @R1+
olivier.girard 1385d 06h /openmsp430/trunk/core/rtl/
101 Cosmetic change in order to prevent an X propagation whenever executing a byte instruction with an uninitialized memory location as source. olivier.girard 1385d 08h /openmsp430/trunk/core/rtl/
91 Fixed bug when an IRQ arrives while CPU is halted through the serial debug interface.
This bug is CRITICAL for people using working with interrupts and the Serial Debug Interface.
olivier.girard 1397d 08h /openmsp430/trunk/core/rtl/
86 Update serial debug interface test patterns to make them work with all program memory configurations. olivier.girard 1420d 05h /openmsp430/trunk/core/rtl/
85 Diverse RTL cosmetic updates. olivier.girard 1420d 07h /openmsp430/trunk/core/rtl/
84 Update SRAM model in the core testbench to prevent the IEEE warning when running simulations.
Update watchdog to fix NMI synchronisation problem.
Add synchronizers for the PUC signal in the debug interface.
olivier.girard 1425d 08h /openmsp430/trunk/core/rtl/
79 Update the GPIO peripheral to fix a potential synchronization issue. olivier.girard 1486d 09h /openmsp430/trunk/core/rtl/
74 Update serial debug interface to support memories with a size which is not a power of 2.
Update the software tools accordingly.
olivier.girard 1573d 08h /openmsp430/trunk/core/rtl/
72 Expand configurability options of the program and data memory sizes. olivier.girard 1600d 09h /openmsp430/trunk/core/rtl/
67 Added 16x16 Hardware Multiplier. olivier.girard 1747d 16h /openmsp430/trunk/core/rtl/
66 The peripheral templates are now under BSD license.
Developers of new peripherals based on these templates won't have to disclose their code.
olivier.girard 1747d 20h /openmsp430/trunk/core/rtl/
60 Cleanup of the PC (R0) generation logic.
Formal equivalence was shown between the new and old code with Synopsys' Formality (to make sure that nothing has been broken :-P ).
olivier.girard 1779d 07h /openmsp430/trunk/core/rtl/
57 Update design to exclude the range mode from the debug hardware breakpoint units. As this feature is not used by GDB, it has been disabled in order to improve the timings and save a bit of area/utilisation.
Note that if required, this feature can be re-enabled through the `HWBRK_RANGE define located in the "openMSP430_defines.v" file.
olivier.girard 1781d 05h /openmsp430/trunk/core/rtl/
53 Fixed the following combinatorial timing loop:
1- irq_detect (omsp_frontend)
2- decode (omsp_frontend)
3- dbg_swbrk (omsp_dbg)
4- halt_flag_set (omsp_dbg)
6- dbg_halt_cmd (omsp_dbg)
7- irq_detect (omsp_frontend)

Without this fix, problem could occur whenever an IRQ request arrives during a software breakpoint instruction fetch.
olivier.girard 1786d 10h /openmsp430/trunk/core/rtl/
34 To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. olivier.girard 1815d 09h /openmsp430/trunk/core/rtl/
33 In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).

In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created.
olivier.girard 1815d 10h /openmsp430/trunk/core/rtl/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2014 OpenCores.org, equivalent to ORSoC AB, all rights reserved. OpenCores®, registered trademark.