OpenCores

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_13/] - Rev 338

Rev

Filtering Options

Clear current filter

Rev Log message Author Age Path
338 root 1998d 03h /ethmac/tags/rel_13/
335 New directory structure. root 2055d 08h /ethmac/tags/rel_13/
265 This commit was manufactured by cvs2svn to create tag 'rel_13'. 4354d 05h /ethmac/tags/rel_13/
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 4354d 05h /ethmac/tags/rel_13/
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 4354d 16h /ethmac/tags/rel_13/
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 4354d 16h /ethmac/tags/rel_13/
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 4354d 16h /ethmac/tags/rel_13/
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.
mohor 4355d 04h /ethmac/tags/rel_13/
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 4355d 18h /ethmac/tags/rel_13/
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 4355d 18h /ethmac/tags/rel_13/
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 4355d 18h /ethmac/tags/rel_13/
255 TPauseRq synchronized to tx_clk. mohor 4355d 18h /ethmac/tags/rel_13/
254 Temp version. mohor 4356d 22h /ethmac/tags/rel_13/
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 4357d 00h /ethmac/tags/rel_13/
252 Just some updates. tadejm 4357d 01h /ethmac/tags/rel_13/
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.
mohor 4357d 01h /ethmac/tags/rel_13/
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.
mohor 4357d 01h /ethmac/tags/rel_13/
248 wb_rst_i is used for MIIM reset. mohor 4358d 01h /ethmac/tags/rel_13/
246 Since r_Rst bit is not used any more, default value is changed to 0xa000. mohor 4361d 04h /ethmac/tags/rel_13/
245 Rev 1.7. mohor 4361d 22h /ethmac/tags/rel_13/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2014 OpenCores.org, equivalent to ORSoC AB, all rights reserved. OpenCores®, registered trademark.