OpenCores

Subversion Repositories ha1588

[/] [ha1588/] [trunk/] [sim/] [top/] [ptp_drv_bfm/] [ptp_drv_bfm.v] - Rev 34

Go to most recent revision | Compare with Previous | Blame | View Log

/*
 * $ptp_drv_bfm.v
 * 
 * Copyright (c) 2012, BBY&HW. All rights reserved.
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301  USA
 */
 
`timescale 1ns/1ns
 
module ptp_drv_bfm_sv
(
	input         up_clk,
	output        up_wr,
	output        up_rd,
	output [ 7:0] up_addr,
	output [31:0] up_data_wr,
	input  [31:0] up_data_rd
);
 
import "DPI-C" context task ptp_drv_bfm_c
(
	input real fw_delay
);
 
reg  [ 7:0] up_addr_o;
reg  [31:0] up_data_o;
wire [31:0] up_data_i;
reg         up_wr_o;
reg         up_rd_o;
 
export "DPI-C" task cpu_wr;
task cpu_wr(input int addr, input int data);
	integer i;
	//$display("wr %08x %08x", addr, data);
	for (i=0; i<1; i=i+1) @(posedge up_clk);
	up_addr_o = addr;
	up_data_o = data;
	up_wr_o   = 1'b1;
	for (i=0; i<1; i=i+1) @(posedge up_clk);
	up_addr_o = addr;
	up_data_o = data;
	up_wr_o   = 1'b0;
	for (i=0; i<1; i=i+1) @(posedge up_clk);
endtask
 
export "DPI-C" task cpu_rd;
task cpu_rd(input int addr, output int data);
	integer i;
	for (i=0; i<2; i=i+1) @(posedge up_clk);
	up_addr_o = addr;
	up_rd_o   = 1'b1;
	for (i=0; i<1; i=i+1) @(posedge up_clk);
	up_addr_o = addr;
	up_rd_o   = 1'b0;
	for (i=0; i<2; i=i+1) @(posedge up_clk);
	data      = up_data_rd;
	//$display("rd %08x %08x", addr, data);
endtask
 
export "DPI-C" task cpu_hd;
task cpu_hd(input int t);
	integer i;
	//$display("#%d",t);
	for (i=0; i<=t; i=i+1) @(posedge up_clk);
endtask
 
assign up_wr      = up_wr_o;
assign up_rd      = up_rd_o;
assign up_addr    = up_addr_o;
assign up_data_wr = up_data_o;
assign up_data_i  = up_data_rd;
 
 
 
// start cpu bfm C model
reg up_start;
initial begin
	up_wr_o   = 1'b0;
	up_rd_o   = 1'b0;
	up_addr_o = 'd0;
	up_data_o = 'd0;
 
	@(posedge up_start);
	#100 ptp_drv_bfm_c(5);
end
 
endmodule
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2014 OpenCores.org, equivalent to ORSoC AB, all rights reserved. OpenCores®, registered trademark.