OpenCores

Subversion Repositories ethmac

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /ethmac
    from Rev 342 to Rev 343
    Reverse comparison

Rev 342 → Rev 343

/trunk/bench/verilog/tb_ethernet.v
14761,8 → 14761,8
end
else if (num_of_frames > 4) // MAC does not recognize Dest. ADDR. for lengths 5, 6 => no MISS
begin
if ( (data[15:0] !== 16'h6084) && // wrap bit
(data[15:0] !== 16'h4084) ) // without wrap bit
if ( (data[15:0] !== 16'h6004) && // wrap bit
(data[15:0] !== 16'h4004) ) // without wrap bit
begin
`TIME; $display("*E RX buffer descriptor status is not correct: %0h - len: %0d", data[15:0], num_of_frames);
test_fail("RX buffer descriptor status is not correct");
14771,8 → 14771,8
end
else if (num_of_frames > 2) // MAC does not recognize Dest. ADDR. for length 3, 4 => no MISS, CRC ERROR
begin
if ( (data[15:0] !== 16'h6086) && // wrap bit
(data[15:0] !== 16'h4086) ) // without wrap bit
if ( (data[15:0] !== 16'h6006) && // wrap bit
(data[15:0] !== 16'h4006) ) // without wrap bit
begin
`TIME; $display("*E RX buffer descriptor status is not correct: %0h - len: %0d", data[15:0], num_of_frames);
test_fail("RX buffer descriptor status is not correct");
15293,8 → 15293,8
end
else if (num_of_frames > 4) // MAC does not recognize Dest. ADDR. for lengths 5, 6 => no MISS
begin
if ( (data[15:0] !== 16'h6084) && // wrap bit
(data[15:0] !== 16'h4084) ) // without wrap bit
if ( (data[15:0] !== 16'h6004) && // wrap bit
(data[15:0] !== 16'h4004) ) // without wrap bit
begin
`TIME; $display("*E RX buffer descriptor status is not correct: %0h - len: %0d", data[15:0], num_of_frames);
test_fail("RX buffer descriptor status is not correct");
15303,8 → 15303,8
end
else if (num_of_frames > 2) // MAC does not recognize Dest. ADDR. for length 3, 4 => no MISS, CRC ERROR
begin
if ( (data[15:0] !== 16'h6086) && // wrap bit
(data[15:0] !== 16'h4086) ) // without wrap bit
if ( (data[15:0] !== 16'h6006) && // wrap bit
(data[15:0] !== 16'h4006) ) // without wrap bit
begin
`TIME; $display("*E RX buffer descriptor status is not correct: %0h - len: %0d", data[15:0], num_of_frames);
test_fail("RX buffer descriptor status is not correct");

powered by: WebSVN 2.1.0

© copyright 1999-2014 OpenCores.org, equivalent to ORSoC AB, all rights reserved. OpenCores®, registered trademark.